Return to the thumbnail page Display/hide file information See previous file See next file

Orange feit LED filament. Looks like HPS!!

Orange feit LED filament. Looks like HPS!!

Click to view full size image

While testing out the lamps, I noted that the orange looked very much like High Pressure Sodium. A rich orange-ish gold colour. Even the other lamp pa kages look like they are under HPS. Thoughts?

20170916_144227_HDR.jpg 20170912_235636_HDR.jpg 20170912_212731_HDR.jpg 20170912_204401_HDR.jpg

Light Information

Light Information

Manufacturer:Feit
Lamp
Lamp Type:LED
Electrical
Wattage:4.5
Voltage:120v 60hz

File information

File information

Download: Download this File
Filename:20170912_212731_HDR.jpg
Album name:Lightingguy1994 / LED Lamps
Rating (1 votes):
Keywords:Lamps
File Size:386 KB
Date added:Sep 12, 2017
Dimensions:2464 x 1386 pixels
Displayed:96 times
Date Time:2017:09:12 21:27:31
DateTime Original:2017:09:12 21:27:31
Exposure Bias:0 EV
Exposure Time:1/30 sec
FNumber:f 2.2
Flash:No Flash
Focal length:3.6 mm
ISO:50
Make:LG Electronics
Model:LG-K557
URL:http://www.lighting-gallery.net/gallery/displayimage.php?pos=-137516
Favorites:Add to Favorites
Comments
Andy Sodium
Full Member
***
Offline

Posts: 110
View Gallery


View Profile Personal Message (Offline)
Sep 12, 2017 at 07:54 PM Author: Andy Sodium
Nice! How is the color rendering on this one and the yellow? It looks pretty terrible, which is good news for use as a bug light.

High Pressure Sodium Low Pressure Sodium
SOX 4 EVAR!

Lightingguy1994
Full Member
***
Offline

Gender: Male
Posts: 172
View Gallery

T12 are and always will be my favorite bulb


View Profile Personal Message (Offline)
Sep 12, 2017 at 08:31 PM Author: Lightingguy1994
The orange has low CRI, when looking at the spectrum on a dvd for an idea of it, it goes from red and drops off mid green with a faint spot of blue. It is almost like sodium, if it was in a fixture somewhere i probably wouldn't tell it was an LED. The hertz is even close, but I will be doing comparisons with real sodium.

The yellow lamp has better CRI but its overall colour has a slight green tint to it, almost looks like one of my 175w Metal halide bulbs with contamination issues
streetlight98
Sr. Member
****
Offline

Gender: Male
Posts: 291
View Gallery

Mike McCann


GoL 88219189@N04/albums
View Profile WWW Personal Message (Offline)
Sep 12, 2017 at 08:51 PM Author: streetlight98
Wow cool! I suppose if you had a cobrahead you wanted to display at low-power but with that real HPS look you could use one of these with a mogul-to-medium adapter and a socket extension to center the lamp.

#167

FGS
Sr. Member
****
Offline

Gender: Male
Posts: 360
View Gallery

Rory Mercury!


View Profile Personal Message (Offline)
Sep 12, 2017 at 08:56 PM Author: FGS
I was thinking of buying one of those orange phosphor LED bulbs/fixtures and compare with a typical HPS. But someone has beat me to it!

Why I like LEDs on top of other lighting tech?
LEDs = Upgrade 95% of the applications. (That is if you avoid eBay's LEDs).


LED brainwash? No, people uses them cuz they work well for them.

Lightingguy1994
Full Member
***
Offline

Gender: Male
Posts: 172
View Gallery

T12 are and always will be my favorite bulb


View Profile Personal Message (Offline)
Sep 12, 2017 at 09:40 PM Author: Lightingguy1994
I just did some comparisons with my wallpacks and uploading now. Unfortunately at the end after a few power ups of both units at the same time, the sola ballast with built in ignitor must have sent voltage spikes through the line into the other wallpack where i had the LED in and fried it, now it is EOL and flickering. I will have to get another orange lamp which is no big deal, they are inexpensive anyways.

On a good side note, I am so impressed with how it looks in a wallpack that I am going to buy a few orange lamps and install them in my house wallpacks outside. That will be a good test to see their undisturbed life span
xmaslightguy
Sr. Member
****
Offline

Gender: Male
Posts: 454
View Gallery

^homebuilt fixture


GoL ATL
View Profile WWW Personal Message (Offline)
Sep 12, 2017 at 10:26 PM Author: xmaslightguy
Quote
Unfortunately at the end after a few power ups of both units at the same time, the sola ballast with built in ignitor must have sent voltage spikes through the line into the other wallpack where i had the LED in and fried it, now it is EOL and flickering.

That...or it did what Feit's do best...die an early death

Too bad someone doesn't make a cyan one of these LED bulbs...that'd give a nice MV-ish look

Colored Fluorescent's such as F40T12 Red or  Green or Blue are awesome...

Beta 5
Jr. Member
**
Offline

Gender: Male
Posts: 82
View Gallery

^Atlas Beta Five


View Profile Personal Message (Offline)
Sep 13, 2017 at 08:15 AM Author: Beta 5

That...or it did what Feit's do best...die an early death

Too bad someone doesn't make a cyan one of these LED bulbs...that'd give a nice MV-ish look


That would be cool

Thorn Beta 5 35W SOX 1965 - 2008. Top entry/Side entry

dor123
Hero Member
*****
Offline

Gender: Male
Posts: 2025
View Gallery
My other loves are computers and office equipment


View Profile Personal Message (Offline)
Sep 13, 2017 at 09:09 AM Author: dor123

The orange has low CRI, when looking at the spectrum on a dvd for an idea of it, it goes from red and drops off mid green with a faint spot of blue. It is almost like sodium, if it was in a fixture somewhere i probably wouldn't tell it was an LED. The hertz is even close, but I will be doing comparisons with real sodium.

The yellow lamp has better CRI but its overall colour has a slight green tint to it, almost looks like one of my 175w Metal halide bulbs with contamination issues

My orange LED nightlight starts at the red, peaks at the orange and drops off at lime green. No blue emission at all. color is deeper orange than HPS and LPS lamps.

I"m don't speak english well, and rely on online translating to write in this site.
Please forgive me if my choice of my words looks like offensive, while that isn't my intention.

I hope that LED won't replace all forms of other lighting.

Flurofan96
Full Member
***
Offline

Posts: 205
View Gallery

Professional chandelier swinger


View Profile Personal Message (Offline)
Sep 13, 2017 at 09:23 AM Author: Flurofan96
Solution! To make your ordinary incandescent bulkhead look like an HPS I'd buy these lamps but for 240V

LED streetlights are flipping Yussless!!!! I'd may as well be in the dark!!!!!

Flaming Nora, where are SOX, SON, MH and MV when you need them

Lightingguy1994
Full Member
***
Offline

Gender: Male
Posts: 172
View Gallery

T12 are and always will be my favorite bulb


View Profile Personal Message (Offline)
Sep 13, 2017 at 11:34 AM Author: Lightingguy1994
I agree, it would be nice if they had a MV colour one, I suppose when the daylight LED filament lamps age very well they will take on a greener look.

My orange lamp only had a faint spot of blue in the spectrum, making it look more like HPS and it also throws off a rather decent amount of light
© 2005-2017 Lighting-Gallery.net | Powered by: Coppermine Photo Gallery