Return to the thumbnail page Display/hide file information See previous file See next file

Early Chinese socket

Early Chinese socket

Click to view full size image

This socket design has a flaw, is the polarity is not right, left that group of zero lines and the fire wire connected in reverse

IMG_20190502_154349.jpg mmexport1556414761265.jpg idlefish-msg-1553753396652.jpg Screenshot_2019_0327_183754.jpg

File information

File information

Download: Download this File
Filename:idlefish-msg-1553753396652.jpg
Album name:Men of God / 被照物
Keywords:Miscellaneous
File Size:1552 KB
Date added:Apr 11, 2019
Dimensions:1440 x 1920 pixels
Displayed:54 times
URL:https://www.lighting-gallery.net/gallery/displayimage.php?pos=-158452
Favorites:Add to Favorites
Comments
Ash
Hero Member
*****
Online

View Posts
View Gallery


View Profile Personal Message (Online)
Apr 11, 2019 at 09:31 PM Author: Ash
The reverse of polarity is not a problem - Appliances don't care, and are required to be equally isolated (isolation from touching by the user) on the Phase and Neutral

The socket is good in the springs present in there which hold the connection firmly, but the contact with the plug pin is only from 1 side - so half the current capacity, and there are the Copper strip bridges to the moving parts - which might break after many plug insertions

Can you show a bigger picture of that axial leaded Neon ?
Men of God
Full Member
***
Offline

Gender: Male
View Posts
View Gallery


jiachao.wei.71 chao_813975447 UChyTpXvlQ8ZCfBPP_lJjubg chao990613
View Profile Personal Message (Offline)
Apr 12, 2019 at 09:04 AM Author: Men of God
I will take a picture when I go home on May 1st labor day holiday!

我不会英文,所以我用中文,请你们用翻译网站翻译我打的字!

I can't in English, so I in Chinese, please use the translation website to translate my words!

takemorepills
Sr. Member
****
Offline

View Posts
View Gallery


View Profile Personal Message (Offline)
Apr 28, 2019 at 09:15 AM Author: takemorepills
I like how the design incorporates actual springs for contact retention!

I disagree, the polarity can be slightly dangerous. For example, ideally a light bulb socket would have the screw as neutral and center as line (hot). If the screw shell is hot, then you could conceivably be shocked when removing a bulb, as typically only the center of the socket is switched.
© 2005-2020 Lighting-Gallery.net | Powered by: Coppermine Photo Gallery