This came from the parking lot of a payday lender in Columbus. It was equipped with a pair of Revere Incandescent flood that were butchered to accept 1000w BT-56 MV (photos soon) 2 of the bolts holding this to the concrete base failed and the pole was leaning BAD so the building owner had it taken down and set aside. I asked about it and was told "take it, the owner want's it gone! "
The pole is bent at the base causing the pole to lean roughly 6" to one side .
I'm probably going to use this in 2 separate pieces with the upper portion behind my garage for use with my soon to be restored (hopefully )400w wide-lites and the lower portion on my concrete to mount my 400w Powr/Bracket