Return to the thumbnail page Display/hide file information See next file

My own creation of safety starters

My own creation of safety starters


I put a PTC in series to the glowbottle. If it operates a, defect fluorescent lamp, the PTC becomes hot, its resistance gets higher and the glowbottle can't more strike the defect fluorescent tube.

In the fluorescent fixture , the safety starter's glowbottle was from poor quality and the bimetals strips welded together.

When i turned the light on, the PTC resistor was cold. The other from the
second fluorescent lamp could start, but aufter ~ 20 seconds, the PTC becomes very hot, its resistance becomes higher. As a result of that, the voltage drop over the PTC is to high, the fluorescent tube can not longer operate.

Note : The fluorescent lamp circuit was made for 220V mains, that's why two lamps (15W) are operated in series with one choke.( 20/22/30W)

youtube_HqikHCrRRWo.jpg IMG_20190711_140055~0.jpg IMG_20190712_162228~0.jpg youtube_jtuhG5_VsgQ.jpg

Light Information

Light Information

Manufacturer:Osram
Model Reference:St151
Lamp
Lamp Type:Glow starter with PTC resistor
Fixture
Fixture Type:4x15W
Ballast Type:1x 20W /2x 15W (Siemens)
Socket Type:G13
Electrical
Wattage:15/20W
Voltage:100V~... 250V~ (single/series circuits)
Current:0,4A max.
Physical/Production
Factory Location:Germany
Fabrication Date:80s

File information

File information

Download: Download this File
Filename:youtube_HqikHCrRRWo.jpg
Album name:The Lightman / Fluorescent tube glow starters
Keywords:Gear
File Size:3198 Bytes
Date added:Jul 16, 2019
Dimensions:480 x 360 pixels
Displayed:36 times
URL:https://www.lighting-gallery.net/gallery/displayimage.php?pos=-161950
Favorites:Add to Favorites
Comments
dor123
Hero Member
*****
Offline

Gender: Male
Posts: 2588
View Gallery
Other loves are computers, office equipment, A/Cs


View Profile WWW Personal Message (Offline)
Jul 16, 2019 at 03:45 PM Author: dor123
As these lamps have argon, they can operate, even when the starter not working. I think what happening here, is that the PTC getting hot, as soon as the lamps strikes, and one of them shut off, as it can't holds its discharge anymore without the aid of the starter.

I"m don't speak English well, and rely on online translating to write in this site.
Please forgive me if my choice of my words looks like offensive, while that isn't my intention.

I only working with the European date format (dd.mm.yyyy).

I lives in Israel, which is a 230-240V, 50hz country.

© 2005-2019 Lighting-Gallery.net | Powered by: Coppermine Photo Gallery