Return to the thumbnail page Display/hide file information See previous file See next file

Hinged Pole Complete!

Hinged Pole Complete!

Click to view full size image


I originally wanted to mount my other tapered arm on this but this isn't rock solid enough for a 6ft arm lol. So I used my 4ft "JNY" arm (Joslyn?) that I got from Joe a few years ago. Originally it held an incandescent light. When I get my own house this arm will probably hold my crescent moon Wheeler but there's too many bees/wasps at my current house to install any kind of NEMA head. They'll fill the fixture in no time...

Anyway, to lower the pole you just remove that big fat bolt at the bottom on the front side of the pole. The pole remains standing so you can then walk around behind the pole, pull it towards you slightly, and then walk backwards toward the fence and "walk" your hands up the pole as it lowers. There's just enough clearance between the pole and the fence to allow suitable room to work.

I borrowed this idea from an LG member who did something similar on his deck. I like my deck set-up the way it is but decided to remove the set-up on the other shed (since it wasn't lighting much of the yard) and install a new pole set-up! It's a little rickety but overall good! the bottom of this set-up is a 30" mailbox post spike in the ground with a 4X4 coming out of the ground with a 2X6 and 2X4 sandwiched to it to make it into a 6x6. If I got another section of 6X6 and direct-buried it 4ft it would be better.

061517 007.jpg 051317 001.JPG 050317 003.JPG 032217 004.JPG

File information

File information

Download: Download this File
Filename:050317 003.JPG
Album name:streetlight98 / McCann Lighting - "Lighting for Now, Lighting Forever!"
Keywords:Lanterns
File Size:919 KB
Date added:May 03, 2017
Dimensions:1536 x 2048 pixels
Displayed:131 times
Date Time:2017:05:03 18:55:11
DateTime Original:2009:03:27 06:18:32
Exposure Bias:0 EV
Exposure Time:1/125 sec
FNumber:f 2.8
Flash:No Flash
Focal length:28.8125 mm
Make:ViviCam
Model:V5024
Software:Microsoft Windows Photo Viewer 6.1.7600.16385
White Balance:0
URL:https://www.lighting-gallery.net/gallery/displayimage.php?pos=-133584
Favorites:Add to Favorites
Comments
Lumex120
Hero Member
*****
Offline

Gender: Male
Posts: 1451
View Gallery

105555521242365640724 UCM30tBQDUECOV6VeG5W87Vg zfarmadillo
View Profile Personal Message (Offline)
May 03, 2017 at 07:59 PM Author: Lumex120
I have been trying to figure out a way to install one of my lights outside without a large stepladder. How high could a hinged pole go? I was thinking something like 12'. Seems like this would be the perfect solution, of course I would be stuck using a yardblaster arm instead of a real one.

Any machine is a smoke machine if you operate it wrong enough.

streetlight98
Sr. Member
****
Offline

Gender: Male
Posts: 329
View Gallery

Mike McCann


GoL Mike McCann 88219189@N04/albums
View Profile WWW Personal Message (Offline)
May 03, 2017 at 09:17 PM Author: streetlight98
You can go as high as you want but the higher the pole, the deeper it's gotta be buried. A general rule of thumb is 10% of the overall pole height plus 2ft. With a short yardblaster arm you can probably get away with a 4x4. This 6x6 is one heavy mother.

Please check out my newly-updated website! McCann Lighting Company is where my street light collection is displayed in detail.

© 2005-2019 Lighting-Gallery.net | Powered by: Coppermine Photo Gallery