Return to the thumbnail page Display/hide file information See previous file See next file

McCann Lighting CG CinemaGlo™ Luminaire!

McCann Lighting CG CinemaGlo™ Luminaire!

Click to view full size image

I assembled one fixture for testing (turns out 25W lamps are way too hot for this light, so it's now a 15W-MAX). I jury rigged this in my room as a test. The fixture is zip-tied to my street light display and I wired a plug to the end of the fixture leads and connected a computer cord to it to lengthen the cord. It plugs into an auxiliary receptacle on my street light display.

IF YOU WANT ONE OF THESE, I have eight of these so I am happy to sell off a few of them. I'll paint it a color of your choice (pick from any colors listed on the spec sheet I'll upload to this album). Fixtures will come with the faceplate needed to mount them to a single gang wall box and will come with about 8" long leads to connect to a power supply. Candelabra (nightlight base) phenolic socket is included. I can supply a 15W T6 incandescent lamp or you can use your own.

011917_009.JPG CG_CinemaGlo™_Low-Light_Accent_Light.png 010716_001.JPG 010716_002.JPG

File information

File information

Download: Download this File
Album name:streetlight98 / McCann Lighting - "Lighting for Now, Lighting Forever!"
Rating (1 votes):
File Size:676 KB
Date added:Jan 07, 2017
Dimensions:2048 x 1536 pixels
Displayed:140 times
Date Time:2009:03:27 05:42:08
DateTime Original:2009:03:27 05:42:08
Exposure Bias:0 EV
Exposure Time:1/29296 sec
FNumber:f 2.8
Flash:No Flash
Focal length:28.8125 mm
White Balance:0
Favorites:Add to Favorites
Hero Member

Gender: Male
Posts: 2009
View Gallery

View Profile WWW Personal Message (Offline)
Jan 08, 2017 at 09:21 AM Author: wattMaster
If you wanted it brighter, you could install a LED filament bulb.

SLS! <click

Sr. Member

Gender: Male
Posts: 329
View Gallery

Mike McCann

GoL Mike McCann 88219189@N04/albums
View Profile WWW Personal Message (Offline)
Jan 08, 2017 at 10:17 AM Author: streetlight98
If the lamp is 3" or less in length and an inch or less in diameter then yes, an LED lamp could be used. I happen to already have a small supply of candelabra incandescent lamps so I'll just use what I have. But if I do find LEDs that fit, I might try 40W= or even 60W= LED lamps in one of these fixtures to see how it goes. LEDs run a lot cooler so a 60W= LED will probably run around the same temperature as a 15-25W incandescent.

Please check out my newly-updated website! McCann Lighting Company is where my street light collection is displayed in detail.

© 2005-2019 | Powered by: Coppermine Photo Gallery