|
|
|
|
|
|
Powering a 347 Volt SOX ballast (1)lights*plus01/04/21 at 22:41lights*plus: Off-Load current for the 347 volt ballast? Would t...
|
Powering a 347 Volt SOX ballast (1)lights*plus01/04/21 at 20:29BG101: Interesting .. but what is the off-load current dr...
|
Powering a 347 Volt SOX ballast (1)lights*plus01/04/21 at 14:54lights*plus: I retested this setup and the one with another mul...
|
Powering a 347 Volt SOX ballast (1)lights*plus01/04/21 at 14:46F20T12: SMART!!!!!!
|
Powering a 347 Volt SOX ballast (1)lights*plus12/22/20 at 23:12lights*plus: I glanced at the 75-17-1419 Sola ballast and the 0...
|
|
|
|
|
|
|
Powering a 347 Volt SOX ballast (1)lights*plus12/22/20 at 22:36lights*plus: That's right. It's supposed to be 0.9 amps...
|
Powering a 347 Volt SOX ballast (1)lights*plus12/22/20 at 17:56sox35: Shouldn't current on a 135W SOX lamp be 0.9A.....
|
15-20w series choke on 18W LPSlights*plus12/04/20 at 18:52WorldwideHIDCollectorUSA: I was trying this same experiment with better resu...
|
15-20w series choke on 18W LPSlights*plus11/30/20 at 06:07Globe Collector: As you know, I am not "bogged down" by s...
|
15-20w series choke on 18W LPSlights*plus11/30/20 at 04:38WorldwideHIDCollectorUSA: What about trying a European 4-22w Electronic star...
|
|
|
|
|
|
|
Powering a 347 Volt SOX ballast (2)lights*plus08/28/20 at 21:05joseph_125: This trick is often used on factory wired HID fixt...
|
Powering a 347 Volt SOX ballast (2)lights*plus08/28/20 at 07:15Men of God: 这好像有点欠压
|
Powering a 347 Volt SOX ballast (2)lights*plus08/28/20 at 07:15Men of God: 这好像有点欠压
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 17:10trojmiejski: Same in Europe, here phase to neutral ranged from ...
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 09:24LightsDelight: Oh right. I have heard of 120, 208, 240, 277 and 4...
|
|
|
|
|
|
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 09:20Bulbman256: It is Canada's high voltage standard so 347/60...
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 09:06LightsDelight: What is 347V used in? Had never heard of it before...
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 08:01Bulbman256: Looks like with a bit of custom work you could fit...
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 03:14trojmiejski: As SOX are very rare where I live I don't know...
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 01:50Globe Collector: Easy method if you don't have a clamp-meter, c...
|
|
|
|
|
|
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 01:30lights*plus: Hmm yea, I could measure the lamp current since it...
|
A closeup of some sort of dimple damagelights*plus08/27/20 at 01:24lights*plus: Would this have happened before 1st start-up or af...
|
Powering a 347 Volt SOX ballast (1)lights*plus08/27/20 at 00:20Globe Collector: What was the lamp current? Should be 600mA.
|
A closeup of some sort of dimple damagelights*plus08/27/20 at 00:18Globe Collector: Yep, there's a hole to the outer bulb, the adj...
|
A closeup of some sort of dimple damagelights*plus08/27/20 at 00:01lights*plus: I'm sure this is a manufacturing defect. It...
|
|
|
|
|
|
|
A closeup of some sort of dimple damagelights*plus08/26/20 at 21:49HPSM250R2: Oh no. I wonder what caused this damage to the dim...
|
Powering a 347 Volt SOX ballast (2)lights*plus11/12/19 at 07:16rjluna2: That's explains why you have to convert the pr...
|
18 watt vs 10 watt SOXlights*plus11/11/19 at 18:06Danny: 10w sox are about same width as T12 maybe a little...
|
18 watt vs 10 watt SOXlights*plus11/11/19 at 18:03sox35: Oh I would so love to get a 10W lamp  
...
|
Powering a 347 Volt SOX ballast (2)lights*plus11/10/19 at 19:46lights*plus: No (I think). You have 2 ballasts. You exploit you...
|
