If you had to build a chandelier. « on: October 18, 2022, 04:47:44 PM » Author: WorldwideHIDCollectorUSA
If anyone was tasked with building a homemade chandelier, what light source would you use and why? Personally, I would use non-integrated CFL lamps on preheat circuits or linear fluorescent tubes on preheat circuits because I like watching fluorescent lamps blink to life on preheat circuits when power is applied to them.
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

	Re: If you had to build a chandelier. « Reply #1 on: October 18, 2022, 06:01:20 PM » Author: Burrito
Metal Halide or High Pressure Sodium OR Mercury
		Logged

ON LG FOR 2 YEARS! Please don't ask to meet up with me, as I am still living with my mother. Don't send me items either please, thank you!
Please, watch out for the future. It's not looking good. Loves instruction manuals of any kind!

	Re: If you had to build a chandelier. « Reply #2 on: October 19, 2022, 02:42:53 PM » Author: AngryHorse
Quote from: WorldwideHIDCollectorUSA on October 18, 2022, 04:47:44 PM If anyone was tasked with building a homemade chandelier, what light source would you use and why? Personally, I would use non-integrated CFL lamps on preheat circuits or linear fluorescent tubes on preheat circuits because I like watching fluorescent lamps blink to life on preheat circuits when power is applied to them. Wouldn’t this need a hefty gear box though?  with an even bigger one for HID!
		Logged

Current: UK 230V, 50Hz
Power provider: e.on energy
Street lighting in our town: Philips UniStreet LED (gen 1)
Longest serving LED in service at home, (hour count): Energetic mini clear globe: 55,394 hrs @ 1/6/24

Welcome to OBLIVION

	Re: If you had to build a chandelier. « Reply #3 on: October 25, 2022, 11:58:27 PM » Author: funkybulb
12 volt incandescents
		Logged

No LED gadgets, spins too slowly.  Gotta  love preheat and MV. let the lights keep my meter spinning.

	Re: If you had to build a chandelier. « Reply #4 on: October 31, 2022, 08:38:18 PM » Author: xmaslightguy
It wound depend on the intended purpose... For a standard dining-room (where you'd normally have a chandelier), incandescent with standard C7-size sockets. (that in reality would mean you could use Incandescent, CFL or LED) If it was a large room with high ceilings - say some sorta dining/event hall, then it'd be really cool to do vertical 4-foot "full-piper" type fixtures (4-lamp or especially 8-lamp) ...T12 for a more vintage look, or T5 for a sleek modern look.
		Logged

ThunderStorms/Lightning/Tornados are meant to be hunted down & watched...not hidden from in the basement!

	Re: If you had to build a chandelier. « Reply #5 on: November 20, 2022, 03:00:53 PM » Author: Lamp_o_watcher
If I had an Unlimited Budget, I would first replace every socket with Mogul size, Then, I would wire every socket to a 2kW Metal Halide Ballast and Ignitor. To top it off, a 2000w Osram MH Would go into each socket. Depending on how many sockets, this may or may not be able to light up a Bigger-Than-Average size Horse arena. It also may or may not cause the owner to go bankrupt (Cuz that gear and those lamps, they aint cheap lol)
« Last Edit: November 22, 2022, 10:37:39 PM by Lamp_o_watcher »		Logged

You are young and life is long, and there is time to kill today
And then one day you find ten years have got behind you
No one told you when to run, you missed the starting gun

	Re: If you had to build a chandelier. « Reply #7 on: November 20, 2022, 05:38:16 PM » Author: Econolite03
Mine would be made of a wagon wheel, and have flame effect LED bulbs facing up, and LED par 20s facing down for a downlighting effect. I’d use black PVC pipes to hide the socket assemblies.
		Logged

Now on Linktree

	Re: If you had to build a chandelier. « Reply #8 on: November 21, 2022, 04:18:09 PM » Author: AngryHorse
Quote from: Lamp_o_watcher on November 20, 2022, 03:00:53 PM If I had an Unlimited Budget, I would first replace every socket with Mogul size, Then, I would wire every socket to a 2kW Metal Halide Ballast and Ignitor. To top it off, a 2000w Osram MH Would go into each socket. Depending on how many sockets, this may or may not be able to light up a Bigger-Than-Average size Horse arena. It also may or may not cause the owner to go bankrupt (Cuz that gear and those lamps arent cheap lol) That’s certainly ambitious!, the chandelier would have to be all crystal too take the immense heat, the whole structure would also have a simultaneous ignition voltage of about 250,000 volts!  , and it would end up being the only light fixtures in the world to be fed with 185mm 3 phase cable!
		Logged

Current: UK 230V, 50Hz
Power provider: e.on energy
Street lighting in our town: Philips UniStreet LED (gen 1)
Longest serving LED in service at home, (hour count): Energetic mini clear globe: 55,394 hrs @ 1/6/24

Welcome to OBLIVION