Attached is the images some Philips F32T8/TL-741s in one of my classes last year, while there was a lot of discussion on the age of the lamps, I wasn't completely sure about the age still. So here is what I know about the lamp:

1) It's date code is probably H0 (1980, 2000, 2020)
2) It is not an Alto
3) It has the ePact symbol
4) It has the Hg symbol
5) The building was retrofitted to F32T8 in the late 1990s (there were tons of 1998 Altos starting to go EOL)

There were several more of them in the same building too including one in the louver next to it with two burnt out 1998 Altos. Also the Polish F32T8 next to the lamp in question burned out after less than like 3 years!

 Soo, does anyone know when it was made? While H0 and it being a F32T8/TL-741 seems like an obvious 2000 lamp, I'm really confused on why it has an Hg symbol... On the second image, you can also see another symbol too out of frame on the first.

August 2010 is the only possibility based on the lamp's features.  I don't know why the letter and number are flipped, but (Hg) and "700 Series" were both added in the mid-2000s.  Prior to that the lamps were branded "Hi-Vision" or "TL 70".  The 700 series lamps were discontinued due to regulations in 2014.

Hm, it's possible I read the code wrong even though I'm pretty sure I didn't. Unfortunately all these lights are dust now.

I didn't know the ePact marking lasted so long though, and I didn't know they made F32T8 non-Altos so late.

The (E) stuck around until 2012.  I'm also surprised to see a non-Alto typical 741 lamp that late.  Usually it was the specialty phosphors that continued to be full-mercury.

Ahh, I remember that now. It's such a shame they're not around anymore.

Also side-note, what is going on with the wiring in the bottom picture, why is the middle socket wired to itself? And the side wire holes also seem to be slightly uncommon.

I wouldn't be surprised if these have old electronic ballasts in them since it was still the first generation of ballasts.

Yeah, those are curious lamp holders.  Are these instant start?  It's probably a non-shunted socket using that wire as a jumper to shunt the contacts.

Yes they are, probably on the older side of instant start too. Yeah I just noticed if you look near the top of that socket there does seem to be another wire wrapped in something going to it, how interesting! The sockets originally tricked me into thinking these used to be F40. The bottom one was starting to get a little old though (and its lamp from 1998 was too), it had a gentle flicker sometimes to it. But these could run a long time flickering for a little bit.