Author Topic: Can I connect the video modulation part of this circuit?  (Read 1879 times)
Binarix128
Member
*****
Offline

Gender: Male
View Posts
View Gallery
220V AC 50Hz, NTSC


GoL UCOUT2noI2R__jgPSJUjGRtA
Can I connect the video modulation part of this circuit? « on: November 15, 2019, 12:39:23 PM » Author: Binarix128
I extracted this circuit from a satelital tv decoder to get the modulation part, the up coaxial is the input and the other is the output. It have a lot of pins and a pin that says "5v". I will test the 5v power in this pin and the metal case and touching the pins with a video signal. If anyone can, please help me.

Thanks!  :)
Logged
Medved
Member
*****
Offline

Gender: Male
View Posts
View Gallery

Re: Can I connect the video modulation part of this circuit? « Reply #1 on: November 16, 2019, 01:54:37 AM » Author: Medved
You would need to command it from some microcontroller (likely via i2c), for the modulator to do anything at all...
You need to study the datasheets of the ICs used there...
Logged

No more selfballasted c***

Print 
© 2005-2024 Lighting-Gallery.net | SMF 2.0.19 | SMF © 2021, Simple Machines | Terms and Policies