IS THIS CMH? « on: April 11, 2025, 03:33:04 PM » Author: Eleco_SR304
Looks more different than a standard CPO-TW bulb
		Logged

More now interested in Polish Street lighting, the country where I come from.

LED fixtures need to stop replacing fine-working streetlights. However, I except retrofits, only if it's done very well.

For today I live in England, so except me posting English fixtures as well.

All from me, 220v-240v

	Re: IS THIS CMH? « Reply #1 on: April 11, 2025, 03:34:47 PM » Author: Alex
yes
		Logged

Glück auf ⚒️

	Re: IS THIS CMH? « Reply #2 on: April 11, 2025, 04:03:22 PM » Author: Eleco_SR304
Oh, thanks for the info- just wanted to make sure if it was.
		Logged

More now interested in Polish Street lighting, the country where I come from.

LED fixtures need to stop replacing fine-working streetlights. However, I except retrofits, only if it's done very well.

For today I live in England, so except me posting English fixtures as well.

All from me, 220v-240v

	Re: IS THIS CMH? « Reply #3 on: April 13, 2025, 04:09:43 PM » Author: WorldwideHIDCollectorUSA
A good number of G12 metal halide lamps are ceramic metal halide.
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.