Question About Lamp & Ballast Compatibility « on: July 27, 2022, 01:24:18 AM » Author: 108CAM
I'm thinking of purchasing some 175w MV lamps so I can have some extras for my collection. I plan to run them with an Atco OMB175 ballast designed for 175w MV lamps. This ballast runs off Australia's 240v 50hz mains power supply. I'd like to know if a 175w MV lamp intended for use with a North American 120v 60hz H39 ballast will work safely on an Australian 240v 50hz Atco OMB175 ballast. Remember not everyone knows and understands the meanings of technical terms so a simple yes or no would be great.
		Logged

Fluro starter pings combined with a 50hz ballast hum and blinking tubes is music to my ears.

Rest in Peace Electronic Lamp Manufacturers of Australia
1925-2002

Bring back the AJF Zodiacs!

Total incidents since joining LG: 17
Lamps accidently broken or smashed: 14
Ballast explosions/burnouts: 3

	Re: Question About Lamp & Ballast Compatibility « Reply #1 on: July 27, 2022, 02:23:00 AM » Author: Medved
These medium or lower power MV lamps are the same spec worldwide, so it should work properly...
		Logged

No more selfballasted c***

	Re: Question About Lamp & Ballast Compatibility « Reply #2 on: July 27, 2022, 02:24:21 AM » Author: 108CAM
Thanks
		Logged

Fluro starter pings combined with a 50hz ballast hum and blinking tubes is music to my ears.

Rest in Peace Electronic Lamp Manufacturers of Australia
1925-2002

Bring back the AJF Zodiacs!

Total incidents since joining LG: 17
Lamps accidently broken or smashed: 14
Ballast explosions/burnouts: 3

	Re: Question About Lamp & Ballast Compatibility « Reply #3 on: July 31, 2022, 01:57:28 PM » Author: Mandolin Girl
Our American friends have it easy with the ANSI codes.
		Logged

Hugs and STUFF Sammi xXx (also in Aberdeen)
Published Author
There are two kinds of light  -  the glow that illuminates, and the glare that obscures.
James Thurber
SMILEY ONLY ANSWERS WILL BE DELETED FROM MY POSTS

	Re: Question About Lamp & Ballast Compatibility « Reply #4 on: August 02, 2022, 08:15:04 AM » Author: bulb_tester2009
I also have another confusion, which is why one Philips BPL13 ballast cannot start one GE Biax™ F13BX, while two Philips BPL13 ballasts in parallel can start two GE 13W Biax™ F13BXs?
		Logged

I've been collecting light bulbs since I was 2 years old and I've been collecting them ever since.
 
由于我来自中国，所以英语不精通，大部分内容都是翻译的，所以可能不通顺，请大家谅解
Note:
Bulb base in China:E12(CES) E14(SES) B22d(BC) E27(ES) E40(GES)

	Re: Question About Lamp & Ballast Compatibility « Reply #5 on: August 02, 2022, 09:12:53 AM » Author: Medved
Certain lamp wattages (mainly with those nonballasted quad- or six-tube CFL's) are available with two electrical specs, not compatible to each other. They then usually differ in the base (different position of the keying notches and pins,...). I think the 13W is indeed one of them. No idea for the reason why.
		Logged

No more selfballasted c***