Author Topic: B22d-3 3-pin bayonet lampholders last run  (Read 2634 times)
James
Member
*****
Offline

Gender: Male
View Posts
View Gallery


WWW
B22d-3 3-pin bayonet lampholders last run « on: September 01, 2022, 05:54:09 PM » Author: James
My stock of obsolete 3-pin BC lampholders at work was accidentally thrown out, which is most inconvenient because we still use them and after scouring the whole internet I could not find a single one for sale!

S.Lilley & Son in the UK still has the tooling to produce these in brass, and was kind enough to agree to produce 100pcs in a few months time for a very reasonable price of only about £3 each.

Since the topic sometimes arises here I wonder if any other collectors would be interested in buying any at the same time?  This may be the last time they are ever available again.  Indispensable for running old mercury lamps, fireglow lamps and a wide range of special types.

Please advise in case there is interest, and depending on the quantity perhaps this could be added to my future order without having to take a large minimum order quantity.

See their website at https://s-lilley.co.uk/pdfs/catalogue.pdf
I will order the surface mounted type 3009E
Logged
Rommie
Guest
Re: B22d-3 3-pin bayonet lampholders last run « Reply #1 on: September 01, 2022, 05:56:58 PM » Author: Rommie
I have a few ceramic ones, which you very kindly sent me James, but a brass surface mount type would be useful. I would be interested in two or three, if possible.
Logged
Olav
Member
***
Offline

Gender: Male
View Posts
View Gallery


Olav Kettner
Re: B22d-3 3-pin bayonet lampholders last run « Reply #2 on: September 02, 2022, 04:45:11 AM » Author: Olav
Hello James,

thanks for your engagement. 
Please order 10 pieces of the type "3009E" for me and ask the company if it is possible to produce the type "5030" again for a ceramic 3-pin socket. 

Maybe it's possible if there are enough orders?  I would order that too.

Regards

Olav
Logged
Dark_Photonics
Newbie
*
Offline

View Posts
View Gallery


Re: B22d-3 3-pin bayonet lampholders last run « Reply #3 on: September 14, 2023, 09:38:03 AM » Author: Dark_Photonics
Hello,

I would like to order 2 pcs of the 3009E lampholders if it's still possible  :angel:
Logged
WorldwideHIDCollectorUSA
Member
*****
Offline

Gender: Male
View Posts
View Gallery

HID, LPS, and preheat fluorescents forever!!!!!!


Worldwide HIDCollectorUSA
Re: B22d-3 3-pin bayonet lampholders last run « Reply #4 on: September 15, 2023, 11:19:26 PM » Author: WorldwideHIDCollectorUSA
I found this British Moth trap website still sells 3 pin B22 lampholders.

See here:

https://www.watdon.co.uk/acatalog/E7581-brass-MV-lamp-holder-3-pin.html#SID=124
Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

Rommie
Guest
Re: B22d-3 3-pin bayonet lampholders last run « Reply #5 on: September 16, 2023, 08:41:22 AM » Author: Rommie
Yeah, I had a few from them. Expensive, but what can you do..?
Logged
Print 
© 2005-2024 Lighting-Gallery.net | SMF 2.0.19 | SMF © 2021, Simple Machines | Terms and Policies