Where's the best place I can get terminal blocks? I want to upgrade to terminal blocks and want to get good quality but cheap ones.

I'm curious of this as well.

What type are you looking for..? The type I use most often are these, but I know they're not common your side of the water.

I see them a lot in stores that sell electronic components (like individual resistors, capacitors, LEDs etc). So if you have one in your city, pay them a visit since they'll probably have it.

Failing that, I guess eBay, Mouser or Digikey will have pretty much every kind of terminal block you could imagine.

I have found these on the UK eBay that should do the job.  

We'll be ordering a load as soon as the finances recover from buying lots of lovely SOX lamps 

Nah, terminal blocks are out dated tech now, WAGO connectors are the way forward 

Nah, terminal blocks are out dated tech now, WAGO connectors are the way forward 

I worry about you sometimes, I really do 

Nah, terminal blocks are out dated tech now, WAGO connectors are the way forward 

Just got some myself, they’re great! I just installed some Lithonia LED 4’ strip lights at a local thrift shop and they were filled with wago lev-r-nuts. It was a great installation experience!

Just got some myself, they’re great! I just installed some Lithonia LED 4’ strip lights at a local thrift shop and they were filled with wago lev-r-nuts. It was a great installation experience!

Still prefer good old fashioned choc blocks 

Still prefer good old fashioned choc blocks 

Hey, it's your choice! Nobody's going to judge you for that.

What size and voltage rating?

Standard size and rated for 120v.

Still prefer good old fashioned choc blocks 

Sparkies laugh at you now if you’re still using ‘chock blocks’  WAGOs are so much easier, faster and safer to make connections in, of course you still have to get the correct rating for the job

Sparkies laugh at you now if you’re still using ‘chock blocks’  WAGOs are so much easier, faster and safer to make connections in, of course you still have to get the correct rating for the job

They can laugh all they like, I use what I'm used to and what do the job for me.

I've looked at the WAGO connectors, and I can't see any way of fastening them to a lamp board permanently which is what we need. 

So we will stick with traditional choc blocs.

I was just talking with a local commercial elechicken Sunday and he has never seen wagos before and almost. We still use wire nuts and etape round these parts. He was telling me about a connection I found on a 40 year old building, bare crimp sleeve and etape around that, not to mention flathead only hardware. Apparently that was used before wire nuts came into play. I don’t like wire nuts but alas it’s the standard here.